Archives

Special Purpose Kits for H-60

EAA Tools offers Special Purpose Kits (various PNs) for H-60/S-70, each of which comprise a selection of system-specific special tools. Each kit targets a specific system and may be purchased, inventoried, and checked out as a single line-item for the servicing of a particular aircraft system.

Bearing and Bushing Kit (BBK-60-AA) for A/L/M contains key peculiar hand tools to service the bearings and bushings throughout the aircraft. Kit contents:

  1. DSBP-60-AA: H-60 Damper Spherical Bearing Press
  2. RBAT-60-AA: H-60 Main Rotor Bushing Alignment Tool
  3. FCBP-60-AA: H-60 Flight Control Bearing Press
  4. SBP-60-AA: H-60 Spindle Bearing Press
  5. SSBP-60-AA: H-60 Swashplate Scissor Bearing Press
  6. RMP-60-AA: H-60 Pilot Seat Resilient Mount Press
  7. PCLT-60-AA: H-60 Pitch Control Link Tool
  8. EAA-BBK-PKG: SPK, BBK, Case and Foam

Transmission Service Kit (XMSKA-60-AA for A Models, XMSKLM-60-AA for L/M Models) for A/L/M contains key peculiar hand tools to service the main transmission of the aircraft. Kit contents:

  1. ZBAR-60-AA: H-60 Main Module Hardware Installation Tool
  2. CDR-60-AA: H-60 XMSN Chip Detector Removal Tool
  3. FBR-60-AA: H-60 Main Mod XMSN Oil Filter Bowl Shut Off/Rem. Tool
  4. PRTA-60-AA: H-60 Pitch Change Rod Torque Adapter
  5. RBTA-60-AA: H-60 AFT Main Mod Mount Bolt Torque Adapter
  6. MMS-60-AA: H-60 3/4 Drive, 11/16 Socket for Main Module Hardware
  7. SRT-60-AA: H-60 Gearbox Spline Removal Tool
  8. GBSP-60-AA: H-60 Gearbox Seal Removal Tool
  9. EAA-XMSK-PKG: SPK, XMSK, Case and Foam

Landing Gear Kit (LGK-60-AA) for A/L/M contains key peculiar hand tools to service the main landing gear and tail wheel of the aircraft. Kit contents:

  1. STA-60-AA: H-60 Main Landing Gear Strut Torque Adapter
  2. SPG-60-AA: H-60 Main Landing Gear Strut Pressure Gauge
  3. TYT-60-AA: H-60 Tail Yoke Teflon Washer Alignment Jig
  4. MLGS-60-AA: H-60 Main Landing Gear 2-1/4 Socket and Adapter
  5. SLGS-60-AA: H-60 1-7/16 1/2 Drive Socket for Landing Gear Strut
  6. BSD-60-AA: H-60 Brake-Strut-Damper Servicing Kit
  7. EAA-LGK-PKG: SPK, LGK, Case and Foam

Blade Removal and Install Kit (BAK-60-AA) for A models contains key peculiar hand tools to remove and install the main rotor blades. Kit contents:

  1. BLC-60-AA: H-60 Main Rotor Blade Lift Cradle
  2. BAT-60-AA: H-60 Main Rotor Blade Alignment Tool
  3. EAA-BAK-PKG: SPK, BAK, Case and Foam

Main Rotor Head Kit (MRK-60-AA) for A/L/M contains key peculiar and hard-to-find commercial hand tools to service the main rotor head of the aircraft. Kit contents:

  1. SP-60-AA: H-60 Main Rotor Spindle Puller
  2. DSBP-60-AA: H-60 Damper Spherical Bearing Press
  3. RBAT-60-AA: H-60 Main Rotor Bushing Alignment Tool
  4. SBCAT-60-AA: H-60 Spindle & Blade Cuff Washer Alignment Tool
  5. SBP-60-AA: H-60 Spindle Bearing Press
  6. SSBP-60-AA: H-60 Swashplate Scissor Bearing Press
  7. PRTA-60-AA: H-60 Pitch Change Rod Torque Adapter
  8. FBBW-60-AA: H-60 Fixture Brace for Bifilar Weights Bolts
  9. BAT-60-AA: H-60 Main Rotor Blade Alignment Tool
  10. TIRK-60-AA: H-60 Threaded Insert Replacement Kit, Spindle & HSS
  11. MMS-60-AA: H-60 3/4 Drive, 11/16 Socket for Main Module Hardware
  12. EAA-CFS-01: 3/8″ Drive SAE 1-5/8″ Open-End Crowfoot Wrench
  13. EAA-CFS-02: 3/8″ Drive SAE 1-11/16″ Open-End Crowfoot Wrench
  14. LPP-60-AA: H-60 9/16″ Low Profile Socket for Lower Pressure Plate Bolts
  15. DE-60-AA: H-60 Main Rotor Retaining Nut 20 1/2 Drive Extension
  16. SMTA-60-AA: Shaved 3/4″ Torque Adapter
  17. EAA-MRK-PKG: SPK, MRK, Case and Foam

Tail Rotor/Pylon Kit (TRPKAL-60-AA for A/L Models, TRPKM-60-AA for M Models) for A/L/M contains key peculiar and hard-to-find commercial hand tools to service the tail rotor and tail pylon of the aircraft. Kit contents:

  1. PBP-60-AA: H-60 Tail Rotor Pitch Beam Puller
  2. TRSP-60-AA: H-60 Tail Rotor Star Plate
  3. TRAIT-60-AA: H-60 Tail Rotor Assembly Inspection Tool
  4. PBS-60-AA: H-60 Tail Rotor Pitch Beam Nut Spanner
  5. SCC-60-AA: H-60 Spring Cylinder Clamp
  6. TRQD-60-AA: H-60 Tail Rotor Quick Disconnect Wrench
  7. TRK-60-AA: H-60 Turnbuckle Rigging Kit
  8. PTA-60-AA: H-60 Tail Pylon Torque Adapter
  9. PBRW-60-AA: Tail Rotor Pivot Bearing Replacement Wrench
  10. PF-60-AA: H-60A/L Protractor Fixture
  11. SBRT-60-AA: Stabilator Bolt Removal Tool
  12. SLP-60-AA: Stabilator Position Sensor Limit Switch Lockpin
  13. TRDB-60-AA: 9/16″ Dogbone Torque Adapter
  14. CBP-60-AA: H-60 Outboard Retention Plate Center Bushing
  15. EAA-TRPKAL-PKG: SPK, TRPKAL, Case and Foam

 

Contact EAA Tools today for ordering information


    Read More
    Peculiar Tool (237 WP) Kit for H-60

    Peculiar Tool (237 WP) Kit for H-60

    Our newest addition, the EAA Tools H-60 237WP Peculiar Tool Kit (PTK-60-AA), or PTK, provides a procurable and inventoriable tool kit to replace the issued PTK, which is no longer commercially available. The PTK comprises specialized field-level items and tools compatible with the specifications found in the UH-60 series Technical Manuals (TM1-1520-237-23&P). EAA Tools has updated each tool in the PTK with key usability and durability improvements not found in the TM nor the previously marketed version.

    Kit Contents:

    IMAGEP/NDESCRIPTIONFUNCTIONQTY
    SLP-SqSLP-60-AAStabilator Position Sensor Limit Switch LockpinCalibrate the cockpit indicator and stabilator limit switches.1
    PST1-60-AA-SqPST1-60-AAPitot-Static Power Cable AssemblyProvide 28VDC power to the pitot-static tester.1
    PST2-60-AA-SqPST2-60-AAPitot-Static Tee Air Hose Assembly (AFCS)Perform multiple system air data tests (H-60 adapters for the pitot static tester).1
    PST3-60-AA-SqPST3-60-AAPitot-Static Tee Air Hose Assembly (Pitot-Static/IFF)Perform multiple system air data tests (H-60 adapters for the pitot static tester).1
    BDTB-SqBDTB-60-AABlade De-Ice Test BlockBrace and isolate the blade de-ice test block.1
    SPTH-SqSPTH-60-AAMiscellaneous Switch Panel Test HarnessTest the de-ice system.1
    FP-SqFP-60-AAInput Module Flange PullerRemove the flange from the input module.1
    BDTH-SqBDTH-60-AABlade De-Ice Test Harness (WP 2165)Test the de-ice system.1
    PFAL-SqPFAL-60-AAH-60A/L Protractor FixtureAid in measuring the Stabilator angle (A/L models).1
    PFM-SqPFM-60-AAH-60M Protractor FixtureAid in measuring the Stabilator angle (M models).1
    SIT-SqSIT-60-AASeal Installation Tool SetInstall seals for input module, main GB, intermediate GB I/O, and tail rotor GB output.1
    SSBP-SqSSBP-60-AASwashplate Scissor Bearing PressRemove and install swashplate and scissor bearings.1
    SBRT-SqSBRT-60-AAStabilator Bolt Removal ToolRemove a stuck right hand/left hand stabilator hinge fitting bolt.1
    TRQD-SqTRQD-60-AATail Rotor Cable Quick Disconnect WrenchQuickly loosen or tighten tail rotor cables.1
    PBRW-SqPBRW-60-AATail Rotor Pivot Bearing Replacement WrenchRemove and install the tail rotor pivot bearing.1
    OPIT-SqOPIT-60-AAOil Pump Installation ToolAssist in installing the oil pump.1
    ZBAR-SqZBAR-60-AAMain Module Hardware Installation ToolTorque main module hardware.1
    WDGE-SqWDGE-60-AAWedge, 30/60/90 degreePerform functional checks on gyros and accelorometers (see WP).1
    DBW-SqDBW-60-AADrag Beam Wedge, 5/85/90 degreePerform functional checks on gyros.1
    PCLT-SqPCLT-60-AAPitch Control Link ToolAlign elastomeric bearings on the main rotor pitch control rods.1
    RBTA-SqRBTA-60-AAAFT Main Mod Mount Bolt Torque AdapterPerform torque checks on aft main module bolts without disassembly.1
    FBBW-SqFBBW-60-AAFixture Brace for Bifilar Weights BoltsAssist in applying torque to the bifilar weight 15/16” and 1-1/16” bolt heads.1
    SBCAT-SqSBCAT-60-AASpindle & Blade Cuff Washer Alignment ToolAlign spindle and blade cuff washers for reliable and permanent bonds.1
    Pelican1750-sqEAA-PTK-PKGProtective Case and Custom FoamImpact and environmental resistant protective carrying case, including custom foam.1

    Contact EAA Tools today for ordering information


      Read More
      Flight Controls Rigging System for H-60

      Flight Controls Rigging System for H-60

      The Flight Controls Rigging System (FCRS-60-AA) for H-60 by EAA Tools is a two-part kit, including a full pin set (FCRK-60-AA) as well as an accessories kit (FCRA-60-AA). Together, they comprise a complete solution for rigging the H-60 flight controls in a fast, safe, and predictable manner. The FCRS-60-AA is backward-compatible with legacy and discontinued products provided by other manufacturers, but contains key improvements in quality and usability to provide a superior user experience.

      FLIGHT CONTROL RIGGING PIN SET (FCRK-60-AA)

      The FCRK-60-AA is a complete set of the rig pins required to perform an H-60 flight control rig. This product is backward compatible with the legacy version. EAA has improved the F-pin to be compatible with all A/L/M model aircraft.

      Kit Contents:

      IMAGEP/NDESCRIPTIONACCEPTABLE NSN CROSSQTY
      EAA-80-063-SqEAA-80-063Pin, Ground, Safety (Upper Broom Closet)1730-01-143-33652
      EAA-80-064-SqEAA-80-064Pin, Ground Safety (Lower Broom Closet)1730-01-140-88294
      EAA-42-041-SqEAA-42-041Pin, Pitch Lock (Walking Beam)5315-01-118-18892
      EAA-42-042-SqEAA-42-042Pin, Pitch Lock (Bellcrank Support)5315-01-210-72761
      EAA-80-042-SqEAA-80-042Pin, Ground Safety (Yaw Pedal Adjuster)1730-01-140-88272
      EAA-80-070-SqEAA-80-070Pin, Ground Safety (Stabilator Switch and Synchro)1730-01-141-76381
      EAA-80-068-SqEAA-80-068Pin, Ground Safety (Mixer, Yaw)1730-01-140-88311
      EAA-80-043-SqEAA-80-043Pin, Ground Safety (Torque Shaft)1730-01-141-76374
      EAA-80-065-SqEAA-80-065Pin, Ground Safety (Cyclic Stick Pitch)1730-01-147-99792
      EAA-78-103-SqEAA-78-103Block, Rigging, Main Rotor Head (Damper Blocks)N/A4
      EAA-80-062-SqEAA-80-062Pin, Ground Safety (Yaw/Servo Control)N/A2
      EAA-80-044-SqEAA-80-044Pin, Ground Safety (Pitch/Roll Servo)1730-01-125-07832
      EAA-80-066-SqEAA-80-066Pin, Ground Safety (Cyclic Stick Roll)1730-01-140-88302
      EAA-80-071-SqEAA-80-071Pin, Ground Safety (Tail Rotor Servo)1730-01-140-88321
      EAA-80-046-SqEAA-80-046Pin Assy, Rigging (Mixer)1730-01-125-53831
      Pelican1750-sqEAA-FCRK-PKGCase, Foam, Inventory SheetN/A1

      Flight Control Rigging Accessory Kit (FCRA-60-AA)

      The FCRA-60-AA is a kit of rigging accessories to compliment the pin set. Completing a rig is possible without this product, but adding it to your tool portfolio will ensure rigging is completed efficiently and effectively.

      Kit Contents:

      IMAGEP/NDESCRIPTIONACCEPTABLE NSN CROSSQTY
      LCG-60-AA-SqLCG-60-AALow Collective GaugeMeasure and verify the co-pilot's low collective stop bolt.1
      PSSG-60-AA-SqPSSG-60-AAPrimary Servo/Swashplate GaugeMeasure and verify the piston extension of the primary servo and uniball.1
      NOM-SqNOM-60-AANominal TrammelSet control rods to nominal lengths prior to installation, greatly accelerating rigging.1
      FCBP-SqFCBP-60-AAFlight Control Bearing PressRemove, install, and inspect bearings at ends of flight control rods. 1
      SCC-SqSCC-60-AASpring Cylinder ClampPrevent tail rotor spring cylinders from compressing when disconnected.2
      DPLP-SqDPLP-60-AADigital Protractor Leveling PlateLevel a digital protractor with an expanded base.1
      TRCR-SqTRCR-60-AATail Rotor Control Rod ToolSet tail rotor control rod to its nominal measurement.1
      PAT-SqPAT-60-AAPCL Alignment Tool (6.5")Align the LDS and PAS without the FOD risk of the standard procedure.1
      RCRPA-SqRCRPA-60-AARoll/Coll Pin Alignment ToolAlign and verify straight roll/coll bracket to prevent common rigging errors.1
      LPAT-SqLPAT-60-AALDS/PAS Alignment Tool (3.5")Align the power control levers without the FOD risk of the standard procedure.1
      TRK-SqTRK-60-AATail Rotor Cable Turnbuckle ToolPerform turnbuckle adjustment to set up tail rotor cable tension.2
      TRQD-SqTRQD-60-AATail Rotor Cable Quick Disconnect ToolQuickly loosen or tighten tail rotor cables.1
      Pelican1750-sqEAA-FCRA-PKGCase, Foam, Inventory SheetImpact and environmental resistant protective carrying case, including custom foam.1

      Contact EAA Tools today for ordering information


        Read More
        Expeditionary Maintenance Kit for H-60

        Expeditionary Maintenance Kit for H-60

        EAA Tools offers the H-60/S-70 Series Comprehensive Expeditionary Kit (EXP-60-AA) to support the new emphasis on Expeditionary Aviation Operations. The EXP, a deployable package comprising a selection of carefully chosen peculiar hand tools, empowers the soldier/end-user to operate with limited external resupply while reducing mobility footprint. The kits use MIL-SPEC Pelican 1730 Protector Transport cases with embedded roller wheels, which are watertight, crushproof, and dustproof. A full EXP can be transported in the space of two H-60 seats, providing a force multiplier and force projection. Using the EXP, a line company has the capability to operate autonomously for an extended period with minimal support, capable of performing most (90%) heavy maintenance tasks while providing operational readiness for the short term until heavy maintenance support arrives. The EXP is fully deployable, portable, and inventoriable for accountability.

        Kit Contents:

        Contact EAA Tools today for ordering information


          Read More