Tools

H-60 Standard Expeditionary Kit

Category: H-60 Standard Expeditionary Kit

Components Included in the Kit:

  • Blade Alignment Tool
  • Main Rotor Spindle Puller
  • Tail Rotor Pitch Beam Puller
  • Tail Rotor Pitch Beam Nut Spanner
  • Tail Rotor Assembly Inspection Tool (Qty 2)
  • Tail Rotor Star Plate
  • Chip Detector Removal (Qty 2)
  • Main Module XMSN Oil Filter Bowl Removal Tool
  • Pylon Torque Adapter
  • 3/8” Drive SAE 3/4” Low Profile Spline Torque Adaptor
  • Torque Adapter Set
  • Main Module Installation Tool
  • Flight Control Bearing Press
  • Thin Wall 1/4” Drive, 3/8” Deep Well Socket
  • Brake/Strut/Damper Servicing Kit
  • 2-1/4” Socket, Main Landing Gear, with 1/2” Drive Adapter
  • 1”-7/16” 1/2” Drive Socket Drive Landing Gear Strut
  • Main Landing Gear Strut Pressure Gauge
  • Main Leading Gear Strut Torque Adapter
  • Tail Yoke Teflon Washer Alignment Jig
  • MR Retaining Nut 20” 1/2” Dr Ext.
  • Damper Spherical Bearing Press
  • Fixture Brace for Bifilar Weights Bolts: 15/16” & 1-16”
  • 9/16” Low Profile Socket for Lower Pressure Plate Bolts
  • 3/4” Drive, 11/16” Socket for Main Module Hardware
  • Torque Adapter for Pitch Change Rod
  • Main Rotor Bushing Alignment Tool
  • Spindle/Blade Cuff Washer Alignment Tool (Qty 4)
  • Spindle Bearing Press
  • Swashplate Scissor Bearing Press
  • Threaded Insert Replacement Kit
  • Pilot Seat Resilient Mount Press
  • Turnbuckle Rigging Kit (Qty 2)
  • Tail Rotor Quick Disconnect Wrench
  • Main Mod Mount Bolt Torque
  • Generator Spline Removal Tool
  • Gearbox Seal Removal Tool
  • Outboard Retention Plate Center Bushing Tool
  • 3/8” Drive SAE 7/8” Open-End Crowfoot Wrench
  • 3/8” Drive SAE 1-5/16” Open-End Crowfoot Wrench
  • 3/8” Drive SAE 1-5/8” Open-End Crowfoot Wrench
  • 3/8” Drive SAE 1-11/16” Open-End Crowfoot Wrench
  • Pitch Control Link Tool
  • Stabilator Bolt Removal Tool
  • Blade Lift Cradle (included in A/L models only)