Standard Expeditionary

• Main Rotor Blade Alignment Tool
• Main Rotor Spindle Puller
• Tail Rotor Pitch Beam Puller
• Tail Rotor Pitch Beam Nut Spanner
• Tail Rotor Assembly Inspection Tool (Qty 2)
• Tail Rotor Star Plate
• Chip Detector Removal (Qty 2)
• Main Module XMSN Oil Filter Bowl Removal Tool
• Pylon Torque Adapter
• 3/8” Drive SAE 3/4” Low Profile Spline Torque Adapter
• Torque Adapter Set
• Main Module Installation Tool
• Flight Control Bearing Press
• Thin Wall 1/4” Drive, 3/8” Deep Well Socket
• Brake/Strut/Damper Servicing Kit
• 2-1/4” Socket, Main Landing Gear, with 1/2” Drive Adapter
• 1”-7/16” 1/2” Drive Socket Drive Landing Gear Strut
• Main Landing Gear Strut Pressure Gauge
• Main Leading Gear Strut Torque Adapter
• Tail Yoke Teflon Washer Alignment Jig
• MR Retaining Nut 20” 1/2” Dr Ext.
• Damper Spherical Bearing Press
• Fixture Brace for Bifilar Weights Bolts: 15/16” & 1-16”
• 9/16” Low Profile Socket for Lower Pressure Plate Bolts
• 3/4” Drive, 11/16” Socket for Main Module Hardware
• Torque Adapter for Pitch Change Rod
• Main Rotor Bushing Alignment Tool
• Spindle/Blade Cuff Washer Alignment Tool (Qty 8)
• Spindle Bearing Press
• Swashplate Scissor Bearing Press
• Threaded Insert Replacement Kit
• Pilot Seat Resilient Mount Press
• Turnbuckle Rigging Kit (Qty 2)
• Tail Rotor Quick Disconnect Wrench
• Main Mod Mount Bolt Torque Adapter
• Generator Spline Removal Tool
• Gearbox Seal Removal Tool
• Outboard Retention Plate Center Bushing

237WP Peculiar Tool Kit (PTK)

• Stabilator Position Sensor Limit Switch Lock pin
• Pitot-Static Power Cable Assembly
• Pitot-Static Tee Air Hose Assembly (AFCS)
• Pitot-Static Tee Air Hose Assembly (Pitot-Static/IFF)
• Phenolic Block
• Switch Panel Test Harness
• Input Module Flange Puller
• Blade De-Ice Test Harness
• Protractor Fixtures (A/L and M)
• Input Mod. (Input Seal) Installation Tool
• Main G/B (Output Seal) Installation Tool
• Int. G/B (Input/Output Seal) Installation Tool, Tall G/B (Input Seal) Installation Tool
• Tall G/B (Output Seal) Installation Tool
• Stabilator Bolt Removal Tool
• Tail Rotor Pivot Bearing Replacement Wrench
• Oil Pump Installation Tool
• 30/60/90 degree Wedge
• 5/85/90 degree Drag Beam Wedge
• Pitch Control Link Tool

Essential Aviation Foot Locker (AFL) Tools

• Dial Torque Wrench 0-35 in lb
• Torque Wrench 30-150 ft/lb
• Torque Wrench 50-250 ft/lb
• Torque Wrench 100-1000 in/lb (Qty 2)
• Torque Wrench 10-50 in/lb
• Torque Wrench 40-200 in/lb (Qty 2)
• 0-.125” Dial Depth Gage – knife edge/needle
• Dial Caliper; 0-6”
• Universal Back Plunger Dial Indicator
• 1-3/16” SAE 4-way Angle Head Wrench
• 1-1/4 — 1-5/16” SAE 15 Degree Offset Low Torque
• Slimline Open End Wrench
• 1-1/2 — 1-5/8 SAE 15 Degree Offset Low Torque
• Slimline Open End Wrench
• 1-3/8 — 1-7/16” SAE 15 Degree Offset Low Torque Slimline Open End Wrench
• Spiral Screw Extractor Kit 5 PC
• 24oz Bronze Tip Hammer
• 8’ Bronze Drift Punch
• 5-1/4” 3/8 Pin Punch
• 5-1/4” 5/16 Pin Punch
• 5-3/4” 1/4 Pin Punch
• 5-1/4” 7/32 Pin Punch
• 5-1/4” 3/16 Pin Punch
• 5” 5/32 Pin Punch
• 4-7/32 Pin Punch
• 4pc Miniature Pick Set
• 1/4” hex drive mini ratchet angled head
• 3/8” Drive SAE 7/8” Open-End Crowfoot Wrench
• 3/8” Drive SAE 1-5/8” Open -End Crowfoot Wrench
• 3/8” Drive SAE 1-11/16” Open -End Crowfoot Wrench
• 3/8” Drive SAE 1-5/16” Open -End Crowfoot Wrench
• Pliers Locking Curved 7”
• Scale Weighing 0-60lbs
• Scale Weighing 0-10lbs
• Wrench 1-1/16 ASD FP 12PT
• Handle Hinge 1/2 Dr 18-5/8
• Composite Cast Mallet 42oz
• 18” Adjustable Wrench
• Wrench 1-3/4” Thin
• 3/8” Drive Impact Driver
• Mallet Rawhide 12in L

Cases and Custom Foam